Five Tips for Summer Maintenance of Oldham Couplings
Five Tips for Summer Maintenance of Oldham Couplings
Cross slide coupling is a kind of slide coupling. Pay attention to maintenance skills to extend the service life. The maintenance skills of cross slide coupling are as follows:
1) When assembling, remove burrs and clean all parts
2) When assembling, make sure that the middle two welded fork bearing holes are on the same plane, the allowable difference should not exceed 1°, the spline part should slide freely, and the joints should rotate flexibly
3) Clean the surface, except for the flange end face and the end face key with anti-rust grease, brush the anti-rust primer once and then spray paint (no paint is allowed).
4) Regular lubrication, it is recommended to inject oil once a week, and once a day under high temperature conditions.
5) In order to increase the service life of the cross slide coupling, the cross shaft is adjusted 180 degrees every time it is disassembled so that the cross shaft journals can be used alternately.
relevant information
- Function of coupling
- Treatment method and lubrication of gear coupling failure
- The reason why plum coupling is often damaged
- The difference between star coupling and plum coupling
- The structure and advantages of JQ type clamp coupling
- How to install and connect the coupling
- Installation technology of drum gear coupling
- The keyway type and code of the shaft hole of the diaphragm coupling
Ranking of similar articles
- Function of coupling
- Treatment method and lubrication of gear coupling failure
- The reason why plum coupling is often damaged
- The difference between star coupling and plum coupling
- The structure and advantages of JQ type clamp coupling
- How to install and connect the coupling
- Installation technology of drum gear coupling
- The keyway type and code of the shaft hole of the diaphragm coupling
- Specifications and parameters of plum coupling
- Advantages of elastic pin coupling