The necessary guarantee for the reliable operation of the GCLD drum gear coupling is also to reduce wear.

　　Under the conditions of sufficient tooth root bending strength and tooth surface contact strength, the tooth width should be determined with a larger degree of overlap, and the tooth width should not be increased blindly to avoid unnecessary increase in the structural size.The general tooth width factor is 8-14.The width of the small tooth should be determined by the allowable root stress, and the width required for the displacement of the force point along the tooth width caused by the inclination angle between the shafts should also be considered.

　　An important way to improve the service life of GCLD drum gear couplings.The tooth width coefficient affects the tooth root bending strength and tooth surface contact strength of the tooth. The larger the tooth width coefficient, the greater the strength of these two items. The tooth width coefficient affects the coincidence degree. When the tooth width coefficient is less than a certain value, its value The increase of, has a greater impact on the increase in coincidence, and when it is greater than this certain value, the increase in the device value has a smaller impact on the increase in coincidence. For the drum-shaped gear coupling with circular bulge curve, the tooth width still determines the drum. The radius of the degree circle is also a parameter of the backlash. The larger the tooth width, the larger the radius of the drum circle, and the larger the backlash required. Therefore, the following two requirements are required: the drum tooth surface of the drum gear coupling The contact conditions of the inner and outer teeth are improved, and the disadvantages of edge extrusion and stress concentration of the straight teeth under the condition of angular displacement are avoided. At the same time, the friction and wear of the tooth surface are improved, the noise is reduced, and the maintenance cycle is long.The tooth end of the outer gear sleeve is in the shape of a horn, which makes the assembly and disassembly of the inner and outer teeth very convenient.

　　The main products of our company are LMZ-I plum blossom coupling, SL cross slide coupling, LXZ (formerly HLL) pin coupling, JZMJ diaphragm coupling, GCLD drum gear coupling, etc. For products, customers in need can call our hotline: 13673177240 Contact: Manager Qin For more details, please visit our website: www.rigid-flange-coupling.top