GⅡCLZ drum gear coupling
Summary:GⅡCLZ-drum gear coupling is composed of internal gear ring with the same number of teeth and flange half coupling with external teeth.The external teeth are divided into two types of teeth, straight teeth and drum teeth. The so-called drum teeth means that the external teeth are made into a spherical surface. The center of the spherical surface is on the gear axis, and the backlash is larger than that of ordinary gears.
GⅡCLZ-drum gear coupling is composed of internal gear ring with the same number of teeth and flange half coupling with external teeth.The external teeth are divided into straight teeth and drum teeth. The so-called drum teeth means that the external teeth are made into a spherical surface. The center of the spherical surface is on the gear axis. The tooth side clearance is larger than that of ordinary gears. Allows a larger angular displacement (compared to the straight tooth coupling), which can improve the contact conditions of the teeth, increase the torque transmission capacity, and prolong the service life.The contact state along the tooth width when there is angular displacement.
When the gear coupling is working, the two shafts produce relative angular displacement, and the tooth surfaces of the internal and external teeth periodically slide relative to each other in the axial direction, which will inevitably cause tooth surface wear and power consumption. Therefore, the gear coupling must have a good and Work in a sealed state.Gear couplings have small radial dimensions and large load-bearing capacity. They are often used in shafting transmissions under low-speed and heavy-duty conditions. High-precision and dynamically balanced gear couplings can be used for high-speed transmissions, such as gas turbine shafting. transmission.Since the angular compensation of drum-shaped gear couplings is greater than that of straight-tooth couplings, drum-shaped gear couplings are widely used both inside and outside. Straight-tooth couplings are obsolete products. Those who choose to choose drum-shaped couplings should try their best to use drum-shaped gear couplings. Gear coupling.
Basic parameters and main dimensions of GⅡCLZ basic (narrow) drum gear coupling (JB/T 8854.3-2001) (unit: mm)
model | Nominal torque/Nm | Allowable speed/r/min | Axle hole diameter d1 d2 | Shaft hole length L | D | D1 | D3 | C | Quality Kg | |
Y | J1 | |||||||||
GⅡCLZ1 | 400 | 4000 | 14,16,18,19 | 42 | - | 103 | 71 | 50 | 8 | 3.5 |
20,22,24 | 52 | 38 | 3.3 | |||||||
25,28 | 62 | 44 | 3.5 | |||||||
30,32,35, 38* | 82 | 60 | 4.1 | |||||||
40*, 42*, 45*, 48*, 50* | 112 | 84 | 5.7 | |||||||
GⅡCLZ2 | 710 | 4000 | 20,22,24 | 52 | - | 115 | 83 | 60 | 8 | 5.3 |
25,28 | 62 | 44 | 4.8 | |||||||
30,32,35,38 | 82 | 60 | 5.7 | |||||||
40,42,45,48*, 50*, 55*, 56* | 112 | 84 | 7.2 | |||||||
60 * | 142 | 107 | 9.2 | |||||||
GⅡCLZ3 | 1120 | 4000 | 22,24 | 52 | - | 127 | 95 | 75 | 8 | 3.8 |
25,28 | 62 | 44 | 7.8 | |||||||
30,32,35,38 | 82 | 60 | 7.6 | |||||||
40,42,45,48,50,55,56 | 112 | 84 | 9.8 | |||||||
60*, 63*, 65*, 70* | 142 | 107 | 12.5 | |||||||
GⅡCLZ4 | 1800 | 4000 | 38 | 82 | 60 | 149 | 116 | 90 | 8 | 10.5 |
40,42,45,48,50,55,56 | 112 | 84 | 13.5 | |||||||
60,63,65,70*, 71*, 75* | 142 | 107 | 16.5 | |||||||
80 * | 172 | 132 | 19.4 | |||||||
GⅡCLZ5 | 3150 | 4000 | 40,42,45,48,50,55,56 | 112 | 84 | 167 | 134 | 105 | 10 | 18.1 |
60,63,65,70,71,75 | 142 | 107 | 23.1 | |||||||
80*, 85*, 90* | 172 | 132 | 28.5 | |||||||
GⅡCLZ6 | 5000 | 4000 | 45,48,50,55,56 | 112 | 84 | 187 | 153 | 125 | 10 | 23.9 |
60,63,65,70,71,75 | 142 | 107 | 29.3 | |||||||
80,85,90,95 * | 172 | 132 | 35.4 | |||||||
100*, 105* | 212 | 167 | 36.2 | |||||||
GⅡCLZ7 | 7100 | 3750 | 45,48,50,55,56 | 112 | 84 | 204 | 170 | 140 | 10 | 29.6 |
60,63,65,70,71,75 | 142 | 107 | 36.3 | |||||||
80,85,90,95 * | 172 | 132 | 43.8 | |||||||
100*, 105* | 212 | 167 | 54.3 | |||||||
GⅡCLZ8 | 10000 | 3300 | 50,55,56 | 112 | 84 | 230 | 186 | 155 | 12 | 37.8 |
60,63,65,70,71,75 | 142 | 107 | 46.1 | |||||||
80,85,90,95 | 172 | 132 | 54.9 | |||||||
* 100,105, 110 * | 212 | 167 | 67.4 | |||||||
GⅡCLZ9 | 16000 | 3000 | 60,63,65,70,71,75 | 142 | 107 | 256 | 212 | 180 | 60 | |
80,85,90,95 | 172 | 132 | 71.8 | |||||||
100,110,115,120,125 | 212 | 167 | 88 | |||||||
130,135,140*, 150* | 252 | 202 | 104.4 | |||||||
GⅡCLZ10 | 22400 | 2650 | 65,70,71,75 | 142 | 107 | 287 | 239 | 200 | 14 | 76.1 |
80,85,90,95 | 172 | 132 | 91.1 | |||||||
100,110,120,125 | 212 | 167 | 111.5 | |||||||
130,140,150 | 252 | 202 | 133.5 | |||||||
GⅡCLZ11 | 35500 | 2350 | 110,120,125 | 212 | 167 | 325 | 250 | 235 | 137 | |
130,140,150 | 252 | 202 | 162.4 | |||||||
160,170,175 | 302 | 242 | 193 | |||||||
GⅡCLZ12 | 50000 | 2100 | 130,140,150 | 252 | 202 | 362 | 286 | 270 | 212.8 | |
160,170,180 | 302 | 242 | 268 | |||||||
190,200 | 352 | 282 | 290 | |||||||
GⅡCLZ13 | 71000 | 1850 | 150 | 252 | 202 | 412 | 322 | 300 | 18 | 272.3 |
160,170,180,185 | 302 | 242 | 320 | |||||||
190,200,220,225 | 352 | 282 | 370 | |||||||
GⅡCLZ14 | 112000 | 1650 | 170,180,185 | 302 | 242 | 462 | 420 | - | 22 | 389 |
190,200,220 | 352 | 282 | 438 | |||||||
240,250 | 410 | 330 | 509 | |||||||
GⅡCLZ15 | 180000 | 1500 | 190,200,220 | 352 | 282 | 512 | 465 | - | 22 | 566 |
240,250,260 | 410 | 330 | 650 | |||||||
280,285 | 470 | 380 | 740 | |||||||
GⅡCLZ16 | 250000 | 1300 | 220 | 352 | 282 | 580 | 522 | - | 28 | 751 |
240,250,260 | 410 | 330 | 857 | |||||||
280,300,320 | 470 | 380 | 974 | |||||||
GⅡCLZ17 | 355000 | 1200 | 250,260 | 410 | 330 | 644 | 582 | - | 28 | 1110 |
280,290,300,320 | 470 | 380 | 1255 | |||||||
340,360,365 | 550 | 450 | 1465 | |||||||
GⅡCLZ18 | 500000 | 1050 | 280,295,300,320 | 470 | 380 | 726 | 658 | - | 28 | 1580 |
340,360,380 | 550 | 450 | 1830 | |||||||
400 | 650 | 540 | 2160 | |||||||
GⅡCLZ19 | 710000 | 950 | 300,320 | 470 | 380 | 818 | 748 | - | 32 | 2115 |
340,350,360,380,390 | 550 | 450 | 2457 | |||||||
400,420,440,450,460,000 | 650 | 540 | 2892 | |||||||
GⅡCLZ20 | 1000000 | 800 | 360,380,390 | 550 | 450 | 928 | 838 | - | 32 | 3223 |
400,420,440,450,460,000,000 | 650 | 540 | 3793 | |||||||
530,540 | 800 | 680 | 4680 | |||||||
GⅡCLZ21 | 1400000 | 750 | 400,420,440,450,460,000,000 | 650 | 540 | 1022 | 928 | - | 40 | 4780 |
530,560,600 | 800 | 680 | 5905 | |||||||
GⅡCLZ22 | 1800000 | 650 | 450,460,480,500 | 650 | 540 | 1134 | 1036 | - | 40 | 6069 |
530,560,600,630 | 800 | 680 | 7504 | |||||||
670,680 | 900 | 780 | ||||||||
GⅡCLZ23 | 2500000 | 600 | 500,530,560,600,680 | 800 | 680 | 1282 | 1178 | - | 50 | 9633 |
670,700,710,760,770 | 900 | 780 | 11133 | |||||||
GⅡCLZ24 | 3550000 | 550 | 560,600,630 | 800 | 680 | 1428 | 1322 | - | 50 | 12460 |
670,700,710,750,800 | 900 | 780 | 14465 | |||||||
850,880 | 1000 | 880 | 16110 | |||||||
GⅡCLZ25 | 4500000 | 460 | 670,700,710,750 | 900 | 780 | 1644 | 1538 | - | 50 | 19837 |
800,850 | 1000 | 880 | 22381 | |||||||
900,950 | - | 980 | 24765 | |||||||
10,001,040 | - | 1100 | 27797 |
relevant information
- Function of coupling
- Treatment method and lubrication of gear coupling failure
- The reason why plum coupling is often damaged
- The difference between star coupling and plum coupling
- The structure and advantages of JQ type clamp coupling
- How to install and connect the coupling
- Installation technology of drum gear coupling
- The keyway type and code of the shaft hole of the diaphragm coupling
- Specifications and parameters of plum coupling
- Advantages of elastic pin coupling
- What are the working principles of the coupling
Ever-Power coupling products
- Drum gear coupling
- Serpentine coupling
- Diaphragm coupling
- Plum coupling
- Elastic sleeve pin coupling
- Elastic pin gear coupling
- Elastic pin coupling
- Slider coupling
- Star flexible coupling
- Tyre coupling
- Roller chain coupling
- Rigid coupling
- Water pump coupling
- Coupling accessories
- H-type elastic block coupling