Hot Products
Contact Ever-Power Drive
Botou Ever-Power Transmission Machinery Co., Ltd. " technical knowledge
- How to understand the deviation of the coupling[2016-12-13]
- Coupling is a mechanical part used to connect two shafts (active shaft and driven shaft) in different mechanisms so that they can rotate together to transmit torque
- Conditions and technical parameters required for cold and hot mounting of the shaft hole of the coupling[2016-11-12]
- When selecting a standard coupling or designing a special coupling, first find out the torque that the coupling actually needs to transmit
- Procedures and precautions for daily maintenance of couplings[2016-11-09]
- Coupling is an intermediate part that connects general mechanical equipment motor and bearing or two shafts. The coupling has high torque rigidity
- How to identify and measure the radial and axial direction of the coupling[2016-11-08]
- The radial direction is the direction of the diameter. For example, for a shaft, the outer circle direction is the radial direction.
- The coupling chooser should choose the appropriate coupling balance, etc.[2016-11-07]
- Couplings belong to the category of general mechanical parts, and are used to connect two shafts in different mechanisms to rotate together to transmit torque.
- Drum-shaped gear coupling lubrication improves service life[2016-10-17]
- High-speed drum gear couplings are usually lubricated with lubricating oil. The tooth surface requires continuous lubrication, and the lubricating oil should be drained smoothly
- Fixing method of pin coupling[2016-10-14]
- Elastic coupling positioning screw fixation: The two positioning screws have a gap of 90º to lock the fixed shaft, the traditional fixing method
- The market development trend of drum gear couplings[2016-10-13]
- Drum gear couplings have also made certain developments in recent years. According to the specific development direction, we have summarized some of its general development trends.
- Troubleshooting for loose coupling[2016-09-27]
- Rigid couplings currently mainly use the coupling method of coupling sleeves and tapered pins, and most of the feed motor shafts are equipped with flat keys
- Failure Analysis of Drum Gear Coupling[2016-09-26]
- Insufficient oil or lack of oil in the coupling of lifting parts. Or improper use of grease causes calcification of the grease, resulting in the inability to lubricate between the tooth surfaces