Three-jaw coupling for pump
Summary:The three-jaw coupling for pumps uses several pins made of non-metallic materials and is placed in the mating hole between the two halves of the coupling and the inner surface of the outer ring, and the two halves of the coupling are transmitted through the pins器连接。 Connectors.
The three-jaw coupling for pumps uses several pins made of non-metallic materials and is placed in the mating hole between the two halves of the coupling and the inner surface of the outer ring, and the two halves of the coupling are transmitted through the pins器连接。 Connectors.
The coupling has the following characteristics:
(1) The transmission torque is large. At the same torque, the rotation diameter is mostly smaller than that of the gear coupling, and the volume is lighter. It can partially replace the gear coupling.
(2) Compared with gear couplings, it has a simple structure, fewer components, and is more convenient to manufacture. It does not require gear processing machines.
relevant information
- Function of coupling
- Treatment method and lubrication of gear coupling failure
- The reason why plum coupling is often damaged
- The difference between star coupling and plum coupling
- The structure and advantages of JQ type clamp coupling
- How to install and connect the coupling
- Installation technology of drum gear coupling
- The keyway type and code of the shaft hole of the diaphragm coupling
- Specifications and parameters of plum coupling
- Advantages of elastic pin coupling
- What are the working principles of the coupling
Ever-Power coupling products
- Drum gear coupling
- Serpentine coupling
- Diaphragm coupling
- Plum coupling
- Elastic sleeve pin coupling
- Elastic pin gear coupling
- Elastic pin coupling
- Slider coupling
- Star flexible coupling
- Tyre coupling
- Roller chain coupling
- Rigid coupling
- Water pump coupling
- Coupling accessories
- H-type elastic block coupling