Hot Products
Contact Ever-Power Drive
- The use and normal maintenance of the coupling[2016-11-18]
- Coupling is the intermediate connecting part of each motion mechanism. It has a direct impact on the normal operation of each motion mechanism. Therefore, pay attention when using it.
- What kinds of material treatments and related characteristics on the surface of the coupling[2016-11-16]
- The high-quality manufacturing of the coupling includes the strength and fatigue strength of the coupling matrix and the coupling parts and elastic components
- Introduce the structural characteristics of the elastic coupling in detail[2016-11-15]
- The elastic coupling uses parallel or spiral groove system to adapt to various deviations and transmit torque
- Introduce the standard tolerance of the coupling in detail[2016-11-14]
- The load category of the coupling in the transmission system is the basic basis for selecting the type of coupling
- Conditions and technical parameters required for cold and hot mounting of the shaft hole of the coupling[2016-11-12]
- When selecting a standard coupling or designing a special coupling, first find out the torque that the coupling actually needs to transmit
- Procedures and precautions for daily maintenance of couplings[2016-11-09]
- Coupling is an intermediate part that connects general mechanical equipment motor and bearing or two shafts. The coupling has high torque rigidity
- How to identify and measure the radial and axial direction of the coupling[2016-11-08]
- The radial direction is the direction of the diameter. For example, for a shaft, the outer circle direction is the radial direction.
- The coupling chooser should choose the appropriate coupling balance, etc.[2016-11-07]
- Couplings belong to the category of general mechanical parts, and are used to connect two shafts in different mechanisms to rotate together to transmit torque.
- Instructions for the correct installation and use of the diaphragm coupling[2016-11-05]
- Before installation, check whether the prime mover and the working machine are concentric, and whether there are wrapping paper and bruises on the surfaces of the two shafts.
- Correct disassembly of the coupling[2016-11-03]
- When disassembling the coupling, the connecting bolt is usually removed first, because a layer of grease, corrosion products and other deposits are deposited on the surface of the thread.