The best way to connect O-ring Chains Remarks to connect general O-ring Chains

1.A connecting website link of an O-ring Chain for standard application is pre-coated with grease with the pins. Prior to connection, verify the grease within the surfaces of pins, and if the amount of grease is tiny, apply grease with bare hands. (If gloves are utilized, the grease will likely be absorbed through the gloves.)
Example: When the connecting link (I) of an O-ring chain for common application is
shipped, O-rings are fitted with the roots with the pins. In the event the O-rings come loose as a result of vibration during transport, refit the O-rings in to the roots on the pins.
In this instance, make sure you return the grease collected at the roots of the pins to the central surfaces of your pins, more at portion A than at portions B proven during the above illustration. (Portions A is worn due to sliding together with the bushings.)
two.The chain may be most conveniently connected over the teeth of a sprocket. Engage the back links at each ends in the chain with the sprocket teeth and match connecting pins. When the sprocket can be moved, the chain may also be connected within the loosened side.
3. Connecting procedure
one.Verify that O-rings are attached for the roots with the pins.
2.If your quantity of grease utilized on the connecting pins is little, coat the pins with grease at the central portions.
3.Insert the connecting pins to the bushings from the inner links at each ends.
4.Verify the grease is utilized to your entire face on the O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins into the connecting plate and though pressing the connecting plate, install the spring clip. Verify regardless of whether the head (the end with no split) of the spring clip is turned from the feeding path from the chain. (See the following illustration.)
6.Make sure you confirm the spring clip is securely fitted in the clip grooves with the connecting pins.
This completes jointing from the connecting website link. Note that grease around the surfaces of connecting pins and O-rings may be removed throughout set up function. In this instance, re-grease employing the grease within the surface from the base chain or even the grease inside the polyethylene bag by which the connecting hyperlink was contained.