Tag Archives: rubber coupling

China Rubber complete couplingTyre coupling coupling element

Structure: tyre
Adaptable or Rigid: Flexible
Normal or Nonstandard: Normal
Materials: Steel
Product Amount: LL8
Packaging Information: normal export packing and wooden pallets packing
Port: XIHU (WEST LAKE) DIS.G

Attributes:
one. Acts as Self-Aligning Agent
2.Avoids Metal Make contact with
three.Smoothness Vibration
4 Presents Life to Bearings
five. Removes Disagreeable Sound
six.Takes Finish Amount Shock Load
seven.Tends to make Simple Substitute
8.Fits to Vertical Push
nine.Avoids Expense In opposition to Breakdown
ten.Decreases Temperature Increase
Cushion Shock Hundreds
It cushions Shock Masses and absorbs Torsional and Lateral Vibration real enemies of valuable equipment. Vibrations that could produce unwanted appears are also isolated. Transmission of gear sounds and motor hum amongst shafts is reduced. CZPT tyre coupling offers just a continual continual dampening influence irrespective of the course of rotation and shields system parts from exhaustion failure.
No Lubrication or Routine maintenance
Tanso tyre couplings demands no lubrication prompting cleanliness that is specially attractive in this sort of fields as meals processing and textiles that’s why requiring no periodic servicing as a outcome.
Simplified Layout
No gears • No seals • No bearings • No sporting components • 2018 New GCLD drum equipment coupling No backlash clearance. CZPT tyre coupling types 1 mixed assembly, there is no relative movement inside of any element.
Simple Set up
Fast and Straightforward to set up • No need to have for specific Shaft Alignment
First assembly of the CZPT tyre coupling is a straightforward procedure. Alignment may be approximately checked by inserting correct measuring products, because modest errors in misalignment are easily, Large Speed Flexible Diaphragm Coupling Disc Coupling accommodated by the Resilient Member. To substitute the Flexible Member, basically loosen the Bolts, get rid of the Tyre and exchange with a new 1. It is not essential to transfer either the driving or pushed equipment during the whole procedure. The split Adaptable Member is placed so that bearing on the two sides is held between the Flanges and the Clamping Rings. The bolts are then tightened into location to grip the Resilient Member completely.
Basic safety
No metal to metallic speak to amongst 2 shafts, for that reason. the cushion coupling insulates from stream of present from 1 shaft to the other No sharp edges, Disc Coupling Adaptable Coupling Diaphragm Coupling metallic surfaces are completed all over.
Distinct product description

Types of Couplings

A coupling is a device used to join two shafts together and transmit power. Its purpose is to join rotating equipment while permitting a degree of end movement and misalignment. There are many types of couplings, and it is important to choose the right one for your application. Here are a few examples of couplings.

Mechanical

The mechanical coupling is an important component in power transmission systems. These couplings come in various forms and can be used in different types of applications. They can be flexible or rigid and operate in compression or shear. In some cases, they are permanently attached to the shaft, while in other cases, they are removable for service.
The simplest type of mechanical coupling is the sleeve coupling. It consists of a cylindrical sleeve with an internal diameter equal to the diameter of the shafts. The sleeve is connected to the shafts by a key that restricts their relative motion and prevents slippage. A few sleeve couplings also have threaded holes to prevent axial movement. This type of coupling is typically used for medium to light-duty torque.
Another type of mechanical coupling is a jaw coupling. It is used in motion control and general low-power transmission applications. This type of coupling does not require lubrication and is capable of accommodating angular misalignment. Unlike other types of couplings, the jaw coupling uses two hubs with intermeshing jaws. The jaw coupling’s spider is typically made of copper alloys. In addition, it is suitable for shock and vibration loads.
Mechanical couplings can be made from a variety of materials. One popular choice is rubber. The material can be natural or chloroprene. These materials are flexible and can tolerate slight misalignment.
gearbox

Electrical

Electrical coupling is the process in which a single electrical signal is transferred from a nerve cell to another. It occurs when electrical signals from two nerve cells interact with each other in a way similar to haptic transmission. This type of coupling can occur on its own or in combination with electrotonic coupling in gap junctions.
Electrical coupling is often associated with oscillatory behavior of neurons. The mechanism of electrical coupling is complex and is studied mathematically to understand its effect on oscillatory neuron networks. For example, electrical coupling can increase or decrease the frequency of an oscillator, depending on the state of the neuron coupled to it.
The site of coupling is usually the junction of opposing cell membranes. The cellular resistance and the coupling resistance are measured in voltage-clamp experiments. This type of coupling has a specific resistance of 100 O-cm. As a result, the coupling resistance varies with the frequency.
The authors of this study noted that electrotonic coupling depends on the ratio between the resistance of the nonjunctional membranes and the junctional membranes. The voltage attenuation technique helps reveal the differences in resistance and shunting through the intercellular medium. However, it is unclear whether electrotonic coupling is electrostatically mediated.
Electrical coupling has also been suggested to play a role in the intercellular transfer of information. There are many examples that support this theory. A message can be a distinct qualitative or quantitative signal, which results in a gradient in the cells. Although gap junctions are absent at many embryonic interaction sites, increasing evidence suggests a role in information transfer.

Flexible

When it comes to choosing the right Flexible Coupling, there are several factors that you should take into account. Among these factors is the backlash that can be caused by the movement of the coupling. The reason for this problem is the fact that couplings that do not have anti-fungal properties can be easily infected by mold. The best way to avoid this is to pay attention to the moisture content of the area where you are installing the coupling. By following these guidelines, you can ensure the best possible installation.
To ensure that you are getting the most out of your flexible couplings, you must consider their characteristics and how easy they are to install, assemble, and maintain. You should also look for elements that are field-replaceable. Another important factor is the coupling’s torsional rigidity. It should also be able to handle reactionary loads caused by misalignment.
Flexible couplings come in many different types. There are diaphragm and spiral couplings. These couplings allow for axial motion, angular misalignment, and parallel offset. They have one-piece construction and are made from stainless steel or aluminum. These couplings also offer high torsional stiffness, which is beneficial for applications requiring high torques.
Flexible couplings have several advantages over their rigid counterparts. They are designed to handle misalignments of up to seven degrees and 0.025 inches. These characteristics are important in motion control applications. Flexible couplings are also inexpensive, and they do not require maintenance.
gearbox

Beam

A beam coupling is a type of mechanical coupling, usually one solid piece, that connects two mechanical parts. Its performance is largely determined by the material used. Typical materials include stainless steel, aluminum, Delrin, and titanium. The beam coupling is rated for different speeds and torques. The coupling should be selected according to the application. In addition to the material, the application should also consider the speed and torque of the system.
There are two main types of beam couplings. The first is the helical beam coupling, which has a continuous multi spiral cut. This type of coupling offers a high degree of flexibility and compensates for a high degree of misalignment. The second type of beam coupling is the helical shaft coupling, which has a low torsional stiffness, which makes it ideal for small torque applications.
Another type of beam coupling is the multiple beam design, which combines two beams. It allows for more tolerance in manufacturing and installation and protects expensive components from excessive bearing loads. It also helps keep beams shorter than a single beam coupling. This type of coupling also enables a higher torque capacity and torsional stiffness.
Beam couplings can be manufactured with different materials, including stainless steel and aluminum. The “A” series is available in aluminum and stainless steel and is ideal for general-purpose and light-duty applications. It is also economical and durable. This type of coupling can also be used with low torque pumps or encoder/resolver systems.

Pin & bush

The Pin & bush coupling is a versatile, general-purpose coupling with high tensile bolts and rubber bushes. It can tolerate a wide range of operating temperatures and is suitable for use in oil and water-resistance applications. Its unique design enables it to be used in either direction. In addition, it requires no lubrication.
The pin bush coupling is a fail-safe coupling with a long service life and is used for high-torque applications. It provides torsional flexibility and dampens shocks, making it a flexible coupling that protects equipment and reduces maintenance costs. Its hubs are forged from graded cast iron for strength and durability. Besides, the coupling’s elastomer elements reduce vibration and impact loads. It also accommodates a misalignment of up to 0.5 degrees.
Pin & bush couplings are a popular choice for a variety of different applications. This coupling features a protective flange design that protects the coupling flange from wear and tear. The coupling nut is secured to one flange, while a rubber or leather bush sits between the other flange. Its unique design makes it ideal for use in applications where misalignment is a small factor. The rubber bushing also helps absorb vibration and shock.
gearbox

Mesh tooth

Mesh tooth couplings are used to transfer torque between two shafts and reduce backlash. However, mesh tooth couplings have some limitations. One disadvantage is the break-away friction factor in the axial direction. This problem is caused by the high contact force between the tooth and gear mesh. This can cause unpredictable forces on the shafts.
In this paper, we present a FEM model for mesh tooth coupling. We first validate the mesh density. To do so, we compute the bolt stress as a uniaxial tensile during the tightening process. We used different mesh sizes and mesh density to validate our results.
The mesh stiffness of gear pairs is influenced by lead crown relief and misalignment. For example, if one tooth is positioned too far in the axis, the mesh stiffness will be decreased. A misaligned gear pair will lose torque capacity. A mesh tooth coupling can be lubricated with oil.
An ideal mesh tooth coupling has no gaps between the teeth, which reduces the risk of uneven wear. The coupling’s quality exposed fasteners include SAE Grade 5 bolts. It also offers corrosion resistance. The couplings are compatible with industrial environments. They also eliminate the need for selective assembly in sleeve couplings.
China Rubber complete couplingTyre coupling coupling element
editor by czh 2023-03-18

China Shaft Coupling Flexible Rubber Coupling coupling cast

Item Description

shaft coupling versatile rubber coupling

Fast Specifics
Framework: Jaw / Spider
Versatile or Rigid: Adaptable
Standard or Nonstandard: Standard
Substance: Aluminium
Brand name Title: YD
Area of Origin: ZheJiang , China (Mainland)
Product Amount: JM55
Certification: ISO9001:2008
Bore forming: Made by CNC centres
Distinctive Function: Beautiful Workmanship
Bore Dimensions: Meet inch dimension
Invertory: In inventory
Spider color: Purple (Eco-friendly and Yellow chosen)
Spot of Min.aperture: 3-22mm
Location of Max.Aperture: 7-80mm
Max. Torque: 2.4-1880mm

Functions:
1. Light-weight bodyweight, smal minute of inertia and substantial torque.
2. Getting the push vibration buffer, and absorbing the impact generated by motor’s uneven operation
three. Effectively correcting the set up deviation of axial and radial and angular

Your variety reaction of below inquiries will aid us to recommed the most suited design to you asap.
1.Are you seeking for JM kind(setscrew) or JM-C kind(clamp)?
2.What is coupling outer dimeter dimension?
three.What is coupling internal bore measurement and duration?
4.What is coupling materials(aluminium or Stainless metal )?

Dimensions:

Design	Interior Diameter				Outer Diameter	Size	Torque(N.M.)
	D1		D2
	Min.	Max.	Min.	Max.
JM14	three	seven	3	7	14	22	.seven
JM16	3	7	3	7	16	22	.seven
JM20	four	ten	4	ten	20	30	one.7
JM25	4	twelve	4	twelve	twenty five	34	one.seven
JM30	5	sixteen	five	sixteen	thirty	35	1.7
JM40	6	24	six	24	40	sixty six	four.
JM55	8	28	eight	28	fifty five	78	four.
JM65	ten	38	ten	38	65	ninety	15.
JM80	twelve	forty five	12	forty five	eighty	114	15.
JM95	fourteen	fifty five	14	55	ninety five	126	fifteen.
JM105	fifteen	62	fifteen	sixty two	a hundred and five	one hundred forty	15.
JM120	20	74	twenty	seventy four	a hundred and twenty	a hundred and sixty	32.
JM135	22	eighty	22	80	135	185	32.

Packaging Specifics:
Wood or ply cases for export common or according to the buyers
Delivery Detail:3-5 times right after receiving the 30% deposit

Speak to Us

Type:	Engraving Router
Controlling Mode:	CNC
Customized:	Customized
Condition:	New
Cetrification:	ISO 9001:2008
Place of Origin:	Shandong China

###

Customization:	Available \| Customized Request

###

Model	Inner Diameter				Outer Diameter	Length	Torque(N.M.)
	D1		D2
	Min.	Max.	Min.	Max.
JM14	3	7	3	7	14	22	0.7
JM16	3	7	3	7	16	22	0.7
JM20	4	10	4	10	20	30	1.7
JM25	4	12	4	12	25	34	1.7
JM30	5	16	5	16	30	35	1.7
JM40	6	24	6	24	40	66	4.0
JM55	8	28	8	28	55	78	4.0
JM65	10	38	10	38	65	90	15.0
JM80	12	45	12	45	80	114	15.0
JM95	14	55	14	55	95	126	15.0
JM105	15	62	15	62	105	140	15.0
JM120	20	74	20	74	120	160	32.0
JM135	22	80	22	80	135	185	32.0

Type:	Engraving Router
Controlling Mode:	CNC
Customized:	Customized
Condition:	New
Cetrification:	ISO 9001:2008
Place of Origin:	Shandong China

###

Customization:	Available \| Customized Request

###

Model	Inner Diameter				Outer Diameter	Length	Torque(N.M.)
	D1		D2
	Min.	Max.	Min.	Max.
JM14	3	7	3	7	14	22	0.7
JM16	3	7	3	7	16	22	0.7
JM20	4	10	4	10	20	30	1.7
JM25	4	12	4	12	25	34	1.7
JM30	5	16	5	16	30	35	1.7
JM40	6	24	6	24	40	66	4.0
JM55	8	28	8	28	55	78	4.0
JM65	10	38	10	38	65	90	15.0
JM80	12	45	12	45	80	114	15.0
JM95	14	55	14	55	95	126	15.0
JM105	15	62	15	62	105	140	15.0
JM120	20	74	20	74	120	160	32.0
JM135	22	80	22	80	135	185	32.0

What Is a Coupling?

A coupling is a device used to connect two shafts. It transmits power between them and allows for some misalignment or end movement. There are several types of couplings. The most common ones are gear couplings and planetary couplings. However, there are many others as well.

Transfer of energy

Energy coupling is a process by which two biological reactions are linked by sharing energy. The energy released during one reaction can be used to drive the second. It is a very useful mechanism that synchronizes two biological systems. All cells have two types of reactions, exergonic and endergonic, and they are connected through energy coupling.
This process is important for a number of reasons. The first is that it allows the exchange of electrons and their energy. In a single molecule, this energy transfer involves the exchange of two electrons of different energy and spin. This exchange occurs because of the overlap interaction of two MOs.
Secondly, it is possible to achieve quadratic coupling. This is a phenomenon that occurs in circular membrane resonators when the system is statically deflected. This phenomenon has been gaining a great deal of interest as a mechanism for stronger coupling. If this mechanism is employed in a physical system, energy can be transferred on a nanometer scale.
The magnetic field is another important factor that affects the exchange of energy between semiconductor QWs. A strong magnetic field controls the strength of the coupling and the energy order of the exciton. The magnetic field can also influence the direction of polariton-mediated energy transfer. This mechanism is very promising for controlling the routing of excitation in a semiconductor.
gearbox

Functions

Couplings play a variety of functions, including transferring power, compensating for misalignment, and absorbing shock. These functions depend on the type of shaft being coupled. There are four basic types: angular, parallel, and symmetrical. In many cases, coupling is necessary to accommodate misalignment.
Couplings are mechanical devices that join two rotating pieces of equipment. They are used to transfer power and allow for a small degree of end-to-end misalignment. This allows them to be used in many different applications, such as the transmission from the gearbox to the differential in an automobile. In addition, couplings can be used to transfer power to spindles.

Types

There are two main types of couplings: rigid and flexible. Rigid couplings are designed to prevent relative motion between the two shafts and are suitable for applications where precise alignment is required. However, high stresses in the case of significant misalignment can cause early failure of the coupling. Flexible couplings, on the other hand, allow for misalignment and allow for torque transmission.
A software application may exhibit different types of coupling. The first type involves the use of data. This means that one module may use data from another module for its operation. A good example of data coupling is the inheritance of an object. In a software application, one module can use another module’s data and parameters.
Another type of coupling is a rigid sleeve coupling. This type of coupling has a pipe with a bore that is finished to a specified tolerance. The pipe contains two threaded holes for transmitting torque. The sleeve is secured by a gib head key. This type of coupling may be used in applications where a couple of shafts are close together.
Other types of coupling include common and external. Common coupling occurs when two modules share global data and communication protocols. This type of coupling can lead to uncontrollable error propagation and unforeseen side effects when changes are made to the system. External coupling, on the other hand, involves two modules sharing an external device interface or communication protocol. Both types of coupling involve a shared code structure and depend on the external modules or hardware.
Mechanical couplings are essential in power transmission. They connect rotating shafts and can either be rigid or flexible, depending on the accuracy required. These couplings are used in pumps, compressors, motors, and generators to transmit power and torque. In addition to transferring power, couplings can also prevent torque overload.
gearbox

Applications

Different coupling styles are ideal for different applications, and they have different characteristics that influence the coupling’s reliability during operation. These characteristics include stiffness, misalignment capability, ease of installation and maintenance, inherent balance, and speed capability. Selecting the right coupling style for a particular application is essential to minimize performance problems and maximize utility.
It is important to know the requirements for the coupling you choose before you start shopping. A proper selection process takes into account several design criteria, including torque and rpm, acoustic signals, and environmental factors. Once you’ve identified these parameters, you can select the best coupling for the job.
A gear coupling provides a mechanical connection between two rotating shafts. These couplings use gear mesh to transmit torque and power between two shafts. They’re typically used on large industrial machines, but they can also be used in smaller motion control systems. In smaller systems, a zero-backlash coupling design is ideal.
Another type of coupling is the flange coupling. These are easy to manufacture. Their design is similar to a sleeve coupling. But unlike a sleeve coupling, a flange coupling features a keyway on one side and two threaded holes on the other. These couplings are used in medium-duty industrial applications.
Besides being useful for power transmission, couplings can also prevent machine vibration. If vibration occurs in a machine, it can cause it to deviate from its predetermined position, or damage the motor. Couplings, however, help prevent this by absorbing the vibration and shock and preventing damage to expensive parts.
Couplings are heavily used in the industrial machinery and electrical industries. They provide the necessary rotation mechanism required by machinery and other equipment. Coupling suppliers can help customers find the right coupling for a specific application.
gearbox

Criteria for selecting a coupling

When selecting a coupling for a specific application, there are a number of different factors to consider. These factors vary greatly, as do operating conditions, so selecting the best coupling for your system can be challenging. Some of these factors include horsepower, torque, and speed. You also need to consider the size of the shafts and the geometry of the equipment. Space restrictions and maintenance and installation requirements should also be taken into account. Other considerations can be specific to your system, such as the need for reversing.
First, determine what size coupling you need. The coupling’s size should be able to handle the torque required by the application. In addition, determine the interface connection, such as straight or tapered keyed shafts. Some couplings also feature integral flange connections.
During the specification process, be sure to specify which materials the coupling will be made of. This is important because the material will dictate most of its performance characteristics. Most couplings are made of stainless steel or aluminum, but you can also find ones made of Delrin, titanium, or other engineering-grade materials.
One of the most important factors to consider when selecting a coupling is its torque capability. If the torque rating is not adequate, the coupling can be damaged or break easily. Torque is a major factor in coupling selection, but it is often underestimated. In order to ensure maximum coupling performance, you should also take into consideration the size of the shafts and hubs.
In some cases, a coupling will need lubrication throughout its lifecycle. It may need to be lubricated every six months or even once a year. But there are couplings available that require no lubrication at all. An RBI flexible coupling by CZPT is one such example. Using a coupling of this kind can immediately cut down your total cost of ownership.
China Shaft Coupling Flexible Rubber Coupling coupling cast
editor by czh 2023-01-31

China ODM Flange Pipe Joint Connector Seal Bushing Product Expansion Rubber Bellows Coupling ac coupling

Product Description

Nominal Diameter		Duration	Flange outside diameter	Screw center circle diameter	Flange thickness	Screw No	Axial allowable extension		Lateral allowable extension	Rotation angle
mm	inch	ninety five	one hundred forty	one hundred	sixteen	18-four	6	9	nine	15°
32	1 1/4	95	150	a hundred and ten	16	18-four	6	10	9	15°
40	1 1/2	a hundred and five	165	125	eighteen	eighteen-4	seven	10	ten	15°
fifty	two	one hundred fifteen	185	one hundred forty five	18	eighteen-4	seven	13	11	15°
sixty five	2 1/two	130	two hundred	a hundred and sixty	twenty	eighteen-eight	8	15	twelve	15°
80	3	one hundred thirty five	220	a hundred and eighty	20	18-eight	10	19	13	15°
a hundred	four	one hundred seventy	250	210	22	eighteen-eight	12	19	thirteen	15°
125	five	180	285	240	22	22-8	twelve	twenty	14	15°
a hundred and fifty	eight	205	340	295	24	22-eight	sixteen	25	22	15°
200	ten	240	396	350	26	22-twelve	sixteen	25	22	15°
250	12	260	445	four hundred	26	22-twelve	16	25	22	15°
300	14	255	505	460	28	22-16	16	twenty five	22	15°
four hundred	16	255	565	515	32	22-sixteen	16	25	22	15°
450	eighteen	255	615	565	38	26-20	16	twenty five	22	15°
five hundred	20	255	670	620	38	26-20	sixteen	25	22	15°
600	24	260	780	725	38	thirty-twenty	16	25	22	15°

ZheJiang OTS valve Producing Co., Ltd,produce valves for far more than 22 years,our organization focus on R&D of valves for fluid control sector. The company’s items sales include a lot more than forty countries and locations about the world,and offer items and services for much more than 50 internationally renowned brand names.Items are commonly utilised in water,electrical energy,metallurgy,shipbuilding,petrochemical and other fields,and are properly obtained by users!We are adhering to the idea of “creating a perfect top quality impression,establishing cooperation and a CZPT eyesight”,and wholeheartedly provide first-class products and companies to customers from all walks of life around the entire world!Our primary products:Butterfly valve,Blend valve,Check valve,Gate valve,Filter valve,Exhaust valve,End valve,Ball valve,Bottom valve,Harmony valve,Soft Joint valve,Growth Joint valve,Hydraulic Manage valve and so on.
FAQ
one.Can I have a sample purchase for valve?
A: Undoubtedly Yes. We welcome your sample order for test and quality check. Mixed samples are appropriate.
2. Can you provide OEM or ODM service?
A: Indeed, we have professional research & development group. The merchandise can be manufactured as per your request.
three. Can you supply the appropriate documentation and certification?
A:Of course, we can give you with the documentation and certification you require , ISO9001:2000 global high quality system certification,SGS,KC,KS ,Occupational CZPT Management Certification,Trade Registration Form,Good quality Supervision And Msnagement,Credit Score Certificate,Trademark Registration Certification,Safe Manufacturing Standardizationand so forth. Of system we can also provide you the test Report Certificate of Material Examination Certificate of Origin and other export documents if required.
four. What is your phrases of supply?
A: We acknowledge EXW, FOB etc. You can pick the 1 which is the most practical for you.
5. What is actually the package and how do you ship the products?
A: Generally sea deserving plywood cases. We usually ship by sea. Train and air delivery are also optional.
6. How to offer with after revenue ?
A: guarantee time : 12 months from the cargo and we will be responsible for all the top quality problems. Longer warranty time period could be supplied with thorough request and dialogue.
seven. What is the average guide time?
A:For samples, the supply time is about 2-5 times. For batch production, the guide time is about 15-sixty times following obtaining the deposit payment. We can provide creation routine and associated images each 2 weeks. The lead instances turn into powerful when (1) we have received your deposit, and (2) we have your last acceptance for production drawings. If our guide moments do not work with your deadline, please send your requirements with your sale. In all situations we will try to accommodate our manufacturing plan to your requirements.
8. Why select us?
A:1 Genuine goods with superb quality and competitive price.
2,Cooperating with clients all more than the world from more than sixty nations around the world and areas, understanding the markets extremely properly.
3,We have been specializing in circulation handle spot for much more than one7 years. Everyone can be rest assured operating with us. 4,Soon after-sale services will be very-satisfying. Any problem and feed backs will be answered in limited time.
9: How can I trust your company?
A: We are verified Golden supplier and creditable firm on Created-In-China, we are focusing on the prolonged phrase relationship with consumers, we have labored with 1000’s of customers since business created 18 several years back.

US $10-35,000
/ Piece
| 5 Pieces

(Min. Order)

###

Shipping Cost: Estimated freight per unit.	To be negotiated\| Freight Cost Calculator

###

After-sales Service:	GB
Connection:	Flange
Kind:	Natural Compensator

###

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Order Sample

###

Customization:	Available \| Customized Request

###

Nominal Diameter		Length	Flange outside diameter	Screw center circle diameter	Flange thickness	Screw No	Axial allowable extension		Lateral allowable extension	Rotation angle
mm	inch	95	140	100	16	18-4	6	9	9	15°
32	1 1/4	95	150	110	16	18-4	6	10	9	15°
40	1 1/2	105	165	125	18	18-4	7	10	10	15°
50	2	115	185	145	18	18-4	7	13	11	15°
65	2 1/2	130	200	160	20	18-8	8	15	12	15°
80	3	135	220	180	20	18-8	10	19	13	15°
100	4	170	250	210	22	18-8	12	19	13	15°
125	5	180	285	240	22	22-8	12	20	14	15°
150	8	205	340	295	24	22-8	16	25	22	15°
200	10	240	396	350	26	22-12	16	25	22	15°
250	12	260	445	400	26	22-12	16	25	22	15°
300	14	255	505	460	28	22-16	16	25	22	15°
400	16	255	565	515	32	22-16	16	25	22	15°
450	18	255	615	565	38	26-20	16	25	22	15°
500	20	255	670	620	38	26-20	16	25	22	15°
600	24	260	780	725	38	30-20	16	25	22	15°

US $10-35,000
/ Piece
| 5 Pieces

(Min. Order)

###

Shipping Cost: Estimated freight per unit.	To be negotiated\| Freight Cost Calculator

###

After-sales Service:	GB
Connection:	Flange
Kind:	Natural Compensator

###

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Order Sample

###

Customization:	Available \| Customized Request

###

Nominal Diameter		Length	Flange outside diameter	Screw center circle diameter	Flange thickness	Screw No	Axial allowable extension		Lateral allowable extension	Rotation angle
mm	inch	95	140	100	16	18-4	6	9	9	15°
32	1 1/4	95	150	110	16	18-4	6	10	9	15°
40	1 1/2	105	165	125	18	18-4	7	10	10	15°
50	2	115	185	145	18	18-4	7	13	11	15°
65	2 1/2	130	200	160	20	18-8	8	15	12	15°
80	3	135	220	180	20	18-8	10	19	13	15°
100	4	170	250	210	22	18-8	12	19	13	15°
125	5	180	285	240	22	22-8	12	20	14	15°
150	8	205	340	295	24	22-8	16	25	22	15°
200	10	240	396	350	26	22-12	16	25	22	15°
250	12	260	445	400	26	22-12	16	25	22	15°
300	14	255	505	460	28	22-16	16	25	22	15°
400	16	255	565	515	32	22-16	16	25	22	15°
450	18	255	615	565	38	26-20	16	25	22	15°
500	20	255	670	620	38	26-20	16	25	22	15°
600	24	260	780	725	38	30-20	16	25	22	15°

What Is a Coupling?

A coupling is a mechanical device that links two shafts together and transmits power. Its purpose is to join rotating equipment while permitting a small amount of misalignment or end movement. Couplings come in a variety of different types and are used in a variety of applications. They can be used in hydraulics, pneumatics, and many other industries.
gearbox

Types

Coupling is a term used to describe a relationship between different modules. When a module depends on another, it can have different types of coupling. Common coupling occurs when modules share certain overall constraints. When this type of coupling occurs, any changes to the common constraint will also affect the other modules. Common coupling has its advantages and disadvantages. It is difficult to maintain and provides less control over the modules than other types of coupling.
There are many types of coupling, including meshing tooth couplings, pin and bush couplings, and spline couplings. It is important to choose the right coupling type for your specific application to get maximum uptime and long-term reliability. Listed below are the differences between these coupling types.
Rigid couplings have no flexibility, and require good alignment of the shafts and support bearings. They are often used in applications where high torque is required, such as in push-pull machines. These couplings are also useful in applications where the shafts are firmly attached to one another.
Another type of coupling is the split muff coupling. This type is made of cast iron and has two threaded holes. The coupling halves are attached with bolts or studs.
gearbox

Applications

The coupling function is an incredibly versatile mathematical tool that can be used in many different scientific domains. These applications range from physics and mathematics to biology, chemistry, cardio-respiratory physiology, climate science, and electrical engineering. The coupling function can also help to predict the transition from one state to another, as well as describing the functional contributions of subsystems in the system. In some cases, it can even be used to reveal the mechanisms that underlie the functionality of interactions.
The coupling selection process begins with considering the intended use of the coupling. The application parameters must be determined, as well as the operating conditions. For example, if the coupling is required to be used for power transmission, the design engineer should consider how easily the coupling can be installed and serviced. This step is vital because improper installation can result in a more severe misalignment than is specified. Additionally, the coupling must be inspected regularly to ensure that the design parameters remain consistent and that no detrimental factors develop.
Choosing the right coupling for your application is an important process, but it need not be difficult. To find the right coupling, you must consider the type of machine and environment, as well as the torque, rpm, and inertia of the system. By answering these questions, you will be able to select the best coupling for your specific application.
gearbox

Problems

A coupling is a device that connects two rotating shafts to transfer torque and rotary motion. To achieve optimal performance, a coupling must be designed for the application requirements it serves. These requirements include service, environmental, and use parameters. Otherwise, it can prematurely fail, causing inconvenience and financial loss.
In order to prevent premature failure, couplings should be properly installed and maintained. A good practice is to refer to the specifications provided by the manufacturer. Moreover, it is important to perform periodic tests to evaluate the effectiveness of the coupling. The testing of couplings should be performed by qualified personnel.
China ODM Flange Pipe Joint Connector Seal Bushing Product Expansion Rubber Bellows Coupling ac coupling
editor by czh 2023-01-30

China Mh Flexible Rubber Coupling encoder coupling

Merchandise Description

Product Description

COUPLINGS

HRC	FCL	Chain coupling	GE	L	NM	MH	Torque limiter
HRC 70B	FCL90	KC4012	GE14	L050	NM50	MH45	TL250-two
HRC 70F	FCL100	KC4014	GE19	L070	NM67	MH55	TL250-one
HRC 70H	FCL112	KC4016	GE24	L075	NM82	MH65	TL350-2
HRC 90B	FCL125	KC5014	GE28	L090	NM97	MH80	TL350-one
HRC 90F	FCL140	KC5016	GE38	L095	NM112	MH90	TL500-two
HRC 90H	FCL160	KC6018	GE42	L099	NM128	MH115	TL500-1
HRC 110B	FCL180	KC6571	GE48	L100	NM148	MH130	TL700-two
HRC 110F	FCL200	KC6571	GE55	L110	NM168	MH145	TL700-1
HRC 110H	FCL224	KC8018	GE65	L150	NM194	MH175
HRC 130B	FCL250	KC8571	GE75	L190	NM214	MH200
HRC 130F	FCL280	KC8571	GE90	L225
HRC 130H	FCL315	KC1571
HRC 150B	FCL355	KC12018
HRC 150F	FCL400	KC12571
HRC 150H	FCL450
HRC 180B	FCL560
HRC 180F	FCL630
HRC 180H
HRC 230B
HRC 230F
HRC 230H
HRC 280B
HRC 280F
HRC 280H

Catalogue

Workshop

Lots of couplings in stock

FAQ

Q1: Are you trading firm or producer ?
A: We are factory.

Q2: How extended is your delivery time and shipment?
one.Sample Direct-occasions: ten-20 days.
2.Manufacturing Lead-occasions: 30-45 days right after buy confirmed.

Q3: What is your benefits?
one. The most aggressive price tag and excellent top quality.
two. Perfect technological engineers give you the very best help.
three. OEM is available.

US $10
/ Piece
| 10 Pieces

(Min. Order)

###

Standard Or Nonstandard:	Standard
Structure:	Flexible
Material:	Cast Iron
Type:	Elastic Coupling
Material of Element:	Rubber
Color:	Gray

###

Customization:	Available \| Customized Request

###

HRC	FCL	Chain coupling	GE	L	NM	MH	Torque limiter
HRC 70B	FCL90	KC4012	GE14	L050	NM50	MH45	TL250-2
HRC 70F	FCL100	KC4014	GE19	L070	NM67	MH55	TL250-1
HRC 70H	FCL112	KC4016	GE24	L075	NM82	MH65	TL350-2
HRC 90B	FCL125	KC5014	GE28	L090	NM97	MH80	TL350-1
HRC 90F	FCL140	KC5016	GE38	L095	NM112	MH90	TL500-2
HRC 90H	FCL160	KC6018	GE42	L099	NM128	MH115	TL500-1
HRC 110B	FCL180	KC6020	GE48	L100	NM148	MH130	TL700-2
HRC 110F	FCL200	KC6022	GE55	L110	NM168	MH145	TL700-1
HRC 110H	FCL224	KC8018	GE65	L150	NM194	MH175
HRC 130B	FCL250	KC8020	GE75	L190	NM214	MH200
HRC 130F	FCL280	KC8022	GE90	L225
HRC 130H	FCL315	KC10020
HRC 150B	FCL355	KC12018
HRC 150F	FCL400	KC12022
HRC 150H	FCL450
HRC 180B	FCL560
HRC 180F	FCL630
HRC 180H
HRC 230B
HRC 230F
HRC 230H
HRC 280B
HRC 280F
HRC 280H

US $10
/ Piece
| 10 Pieces

(Min. Order)

###

Standard Or Nonstandard:	Standard
Structure:	Flexible
Material:	Cast Iron
Type:	Elastic Coupling
Material of Element:	Rubber
Color:	Gray

###

Customization:	Available \| Customized Request

###

HRC	FCL	Chain coupling	GE	L	NM	MH	Torque limiter
HRC 70B	FCL90	KC4012	GE14	L050	NM50	MH45	TL250-2
HRC 70F	FCL100	KC4014	GE19	L070	NM67	MH55	TL250-1
HRC 70H	FCL112	KC4016	GE24	L075	NM82	MH65	TL350-2
HRC 90B	FCL125	KC5014	GE28	L090	NM97	MH80	TL350-1
HRC 90F	FCL140	KC5016	GE38	L095	NM112	MH90	TL500-2
HRC 90H	FCL160	KC6018	GE42	L099	NM128	MH115	TL500-1
HRC 110B	FCL180	KC6020	GE48	L100	NM148	MH130	TL700-2
HRC 110F	FCL200	KC6022	GE55	L110	NM168	MH145	TL700-1
HRC 110H	FCL224	KC8018	GE65	L150	NM194	MH175
HRC 130B	FCL250	KC8020	GE75	L190	NM214	MH200
HRC 130F	FCL280	KC8022	GE90	L225
HRC 130H	FCL315	KC10020
HRC 150B	FCL355	KC12018
HRC 150F	FCL400	KC12022
HRC 150H	FCL450
HRC 180B	FCL560
HRC 180F	FCL630
HRC 180H
HRC 230B
HRC 230F
HRC 230H
HRC 280B
HRC 280F
HRC 280H

What Is a Coupling?

Types

Applications

Problems

A coupling is a device that connects two rotating shafts to transfer torque and rotary motion. To achieve optimal performance, a coupling must be designed for the application requirements it serves. These requirements include service, environmental, and use parameters. Otherwise, it can prematurely fail, causing inconvenience and financial loss.
In order to prevent premature failure, couplings should be properly installed and maintained. A good practice is to refer to the specifications provided by the manufacturer. Moreover, it is important to perform periodic tests to evaluate the effectiveness of the coupling. The testing of couplings should be performed by qualified personnel.
China Mh Flexible Rubber Coupling encoder coupling
editor by czh 2022-12-30

China EPDM Rubber No Hub a Type Coupling China Factory cohesion and coupling

Merchandise Description

Product Description

Overview
———————————————————————————————————————————————————————————————

location of origin:	ZheJiang , china	Inch:	2″
Color:	Sliver	Custom:	yes
Content:	Stainless Steel, Stainless Steel 201/304	OEM:	yes
Solution identify:	abrazadera A kind coupling	Standard or Nonstandard:	Standard
Application:	Relationship,clamp for weighty obligation,mounting, strapping, clamping	Function:	For automotive, industrial and agricultural apps
Surface area therapy:	Vivid	w1 series:	all areas are carbon metal
Type:	American variety hose clamp	w2 collection:	band andhosing are ss200 or ss300, screw is galvanized
dimensions:	27-51mm	w4 sequence:	all elements are ss200 or ss300

Shielded couplings connect Solid Iron hubless soil pipe and fittings in sanitary and drain squander and vent (DWV) programs. For non-pressure, gravity stream apps only.
Multiple sizes from 1 ¹/_two” to ten”.

No-Hub couplings have an inner gasket manufactured of a artificial rubber compound, polychloroprene (neoprene). The inner gasket is surrounded by an outer stainless metal defend or band with stainless steel worm clamps strategically riveted to the defend to hold them in spot. Series 300 stainless is utilized for corrosion resistance. With the use of a No-Hub Torque Wrench, the installer applies sixty inch-lbs . torque to the 5/16″ hex-head screw for optimum and suitable assembly.

Packaging & Delivery

Set up Directions

Step 2: The inner gasket can then be positioned on the stop of the pipe and folded down in get to align the pipe again in place shut sufficient to be folded again more than and CZPT the pipe.

Stage 3: Fold the interior gasket back more than CZPT the pipe.

Phase 4: And ultimately, slide the shield back more than the gasket and tighten the clamps. For correct tightening use a sixty inch-kilos torque wrench

Organization Profile

we have a lot more than twenty several years of knowledge in the creation and researching of clamps and has been fully commited to producing large-top quality merchandise, particularly excellent at customizing items,Putting clients and business as the prime priority. we mostly creating Americna type, Germany variety , Rubber coated clips and Robust solitary bolt pipe clamps. We have been committed to locating far more steady and greater-priced raw content suppliers to fulfill buyer demands to the biggest extent. And has usually been in advance of the friends in our support subject.

Our Rewards

Be patient with every single client and provide them well

Make it according to customer’s requirement

On time shipping and delivery of each dilemma very good conversation very good communication

Prosperous perform expertise and timely reply to messages

Proficient in product information

We often maintain our rates reduced

Our salesman is extremely skilled and can be recommended

FAQ

one What is your primary items and industry?
Our mostly products are hose clamps specifically stainless steel hose clamps Our items have a much better industry in China and abroad. and get highly praise by users and customers.
two What is the least purchase amount and packing?
Usually 2000 pcs for every dimension. Typically in carton with diverse quantity(excess weight) foundation the items,also can be packed as customer’s asked for.
three What is your payment?
T/T,Western Union,L/C
four How prolonged is the delivery time?
15-30 days right after receiving deposit .At times also affected by the amount and CZPT year.

Standard:	DIN
Material:	Stainless Steel
Connection:	Welding
Surface Treatment:	Without Treatment
Head Type:	Round
Type:	American Type Hose Clamp

###

Samples:	US$ 1/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

place of origin:	Tianjin, china	Inch:	2"
Color:	Sliver	Custom:	yes
Material:	Stainless Steel, Stainless Steel 201/304	OEM:	yes
Product name:	abrazadera A type coupling	Standard or Nonstandard:	Standard
Application:	Connection,clamp for heavy duty,mounting, strapping, clamping	Function:	For automotive, industrial and agricultural applications
Surface treatment:	Bright	w1 series:	all parts are carbon steel
Type:	American type hose clamp	w2 series:	band andhosing are ss200 or ss300, screw is galvanized
size:	27-51mm	w4 series:	all parts are ss200 or ss300

Standard:	DIN
Material:	Stainless Steel
Connection:	Welding
Surface Treatment:	Without Treatment
Head Type:	Round
Type:	American Type Hose Clamp

###

Samples:	US$ 1/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

place of origin:	Tianjin, china	Inch:	2"
Color:	Sliver	Custom:	yes
Material:	Stainless Steel, Stainless Steel 201/304	OEM:	yes
Product name:	abrazadera A type coupling	Standard or Nonstandard:	Standard
Application:	Connection,clamp for heavy duty,mounting, strapping, clamping	Function:	For automotive, industrial and agricultural applications
Surface treatment:	Bright	w1 series:	all parts are carbon steel
Type:	American type hose clamp	w2 series:	band andhosing are ss200 or ss300, screw is galvanized
size:	27-51mm	w4 series:	all parts are ss200 or ss300

Programming With Couplings

A coupling is a mechanical device that connects two shafts together and transmits power. Its purpose is to join rotating equipment and allows some degree of end-movement or misalignment. There are many different types of couplings. It’s important to choose the right one for your application.
gearbox

Mechanical connection between two shafts

There are many ways to achieve mechanical connection between two shafts, including the use of a coupling. One common type is the beam coupling, which is also known as a helical coupling. It is used for transmission of torque between two shafts. This type of connection accommodates axial, parallel and angular misalignments.
The hubs and shafts of a worm gear are connected together by a coupling. This mechanical connection allows one shaft to turn another without causing a mechanical failure. This type of coupling is made from sliding or rubbing parts to transfer torque. However, the coupling is not designed to withstand jerks, so it isn’t suitable for high-speed applications.
The use of a coupling is common in machinery and equipment. It helps transmit power from one drive shaft to the other, while adding mechanical flexibility. It is also useful for reducing the impact and vibration caused by misalignment. It also protects the drive shaft components from wear and tear.
A double-hook coupling can be used to provide a uniform angular velocity at the driven shaft. Another example is a double-jointed coupling. A double-jointed coupling can be used to connect shafts that are not directly intersecting. The double-jointed yoke can be used for the same purpose.
A shaft coupling is a device that maintains a strong mechanical connection between two shafts. It transfers motion from one shaft to another, at all loads and misalignments. Unlike a conventional linkage, a shaft coupling isn’t designed to allow relative motion between the two shafts. Couplings often serve several purposes in a machine, but their primary use is torque and power transmission.

Functions that control the flow of another function

One of the simplest programming constructs is a function that controls the flow of another function. A function can take an argument and return a different value, but it must be ready to return before it can pass that value to another function. To do this, you can use the goto statement and the if statement. Another way to control flow is to use a conditional statement.
gearbox

Criteria for selecting a coupling

There are several important factors to consider when choosing the right coupling. One of the most important factors is coupling stiffness, which depends on the material used and the shape. The stiffness of a coupling determines its ability to resist elastic deformation. A stiff coupling is desirable for certain types of applications, but it’s undesirable for others. Stiffness can reduce the performance of a system if there’s too much inertia. To avoid this, ensure that the coupling you choose is within the recommended limits.
The size of a coupling is also important. Different coupling types can accommodate different shaft sizes and shapes. Some couplings have special features, such as braking and shear pin protection. When choosing a coupling, you should also consider the type of driven equipment. If you need to connect a high-torque motor, for example, you’ll want to choose a gear coupling. Likewise, a high-speed machine may require a disc coupling.
Another factor to consider when selecting a coupling is the torque rating. Despite its importance, it’s often underestimated. The torque rating is defined as the torque of the coupling divided by its OD. In some cases, torque may fluctuate during a cycle, requiring a coupling with a higher torque rating.
Torsionally flexible couplings are also important to consider. Their design should be able to withstand the torque required during operation, as well as the required speed. The coupling should also have a high degree of torsional stiffness, as well as damping. Furthermore, a damping coupling can reduce the energy wasted through vibration.
The sizing of a coupling is also determined by the torque. Many engineers use torque to select the correct coupling size, but they also take into consideration torsional flexibility and torsional stiffness. For example, a shaft may be able to handle large torque without damaging the coupling, while a disk may be unable to handle large amounts of torque.
Besides torque, another important consideration in coupling selection is the cost. While a coupling may be cheaper, it may be less reliable or easier to maintain. Couplings that are difficult to service may not last as long. They may also require frequent maintenance. If that’s the case, consider purchasing a coupling with a low service factor.
There are many different types of couplings. Some require additional lubrication throughout their lifetime, while others are 100% lubrication-free. An example of a 100% lubrication-free coupling is the RBI flexible coupling from CZPT. This type of coupling can significantly reduce your total cost of ownership.
In addition to the above-mentioned benefits, elastomeric couplings are low-cost and need little maintenance. While they are often cheaper than metallic couplings, they also have excellent shock absorption and vibration dampening properties. However, they are susceptible to high temperatures. Also, they are difficult to balance as an assembly, and have limited overload torque capacity.
China EPDM Rubber No Hub a Type Coupling China Factory cohesion and coupling
editor by czh 2022-11-27

China High Quality Customzied Rubber Coupling coupling agent ultrasound

Solution Description

Merchandise Description
Goods	Identify	polyurethane merchandise
	Items category	rubber molded item
	Content	PUR,polyurethane
	Measurement	All dimensions and thickness available.
	Condition	capable of all styles as for every drawing
	Color	All-natural,black, Pantone code or RAL code, or as per client’s samples or needs
	Hardness	20°~90° Shore A, generally 30°~80° Shore A.
	Area finishing	Texture (VDI/MT regular, or manufactured to client’s sample), polished (large polish, mirror polish), smooth, portray, powder coating, printing, electroplating and many others.
	Drawing	Second or 3D draiwng in any graphic/photo format is Alright
	Free sample	Indeed
	OEM/OEM	Sure
	Application	Home, electronics, for vehicles like GM, Ford, Renault, Honda. Equipment, medical center, petrochemical, Military and Aerospace and many others.
	Industry	Europe, North The united states, Oceania
	Top quality certification	ISO 90001:2008, TS16949, Food and drug administration, Achieve, ROHS, SGS
	QC	Each and every order manufacturing will get far more than ten instances standard check out and 5 fives occasions random verify by our specialist QC. Or by Third get together appointed by client

Mildew	Molding Approach	Injection molding, mold processing, extrusion
	Mould type	processing mildew, injection mildew, extrusionmold
	Machines	350T vacuum urgent device and other pressing device at 300T,250T and so on
	Tooling equipment	Rubber rigidity tester, Rubber vulcanization instrument, Durometer, calipers, ageing oven
	Cavity	1~400 cavities
	Mould Existence	three hundred,000~1,00,000 occasions

Generation	Production potential	finish every mould of item in 3 minutes and operating on 3 shifts in 24 hours
	Mold guide time	15~35 days
	Sample lead time	three~5 times
	Generation time	typically fifteen~thirty times, need to be confirmed just before get
	Loading port	HangZhou, ZheJiang , HangZhou or as essential

Solution present

polyurethane rubber molded items:

Merchandise STHangZhouRD
Top quality Certificate	ISO 9000, TS16949, Food and drug administration, Reach, ROHS
Content STHangZhouRD	ASTM D2000, SAE J200, JIN OR AS For every DRAWING
TOLERANCE STHangZhouRD	RMA A1,A2,A3, DIN ISO 3302-1,DIN-7715/BS-3734 OR AS For each DRAWING
Colour STHangZhouRD	PANTONE Shade, RAL Coloration
Top quality Reports	PPAP, Uncooked Materials REPORT, Check REPORT, OFFCIAL REPORT BY Third Celebration

Other principal rubber merchandise:

To Be Negotiated 100 Pieces
(Min. Order)

###

Usage:	Agricultural, Industrial, Medical, Vehicle, Household
Material:	Polyurethane Rubber
Request:	According to Custom′s Request
Materials:	SBR / EPDM
Colors:	Black
Hardness:	30-90 Shore a

###

Customization:	Available \| Customized Request

###

Product Description
Products	Name	polyurethane product
	Products category	rubber molded product
	Material	PUR,polyurethane
	Size	All size and thickness available.
	Shape	capable of all shapes as per drawing
	Color	Natural,black, Pantone code or RAL code, or as per client’s samples or requirements
	Hardness	20°~90° Shore A, usually 30°~80° Shore A.
	Surface finishing	Texture (VDI/MT standard, or made to client’s sample), polished (high polish, mirror polish), smooth, painting, powder coating, printing, electroplating etc.
	Drawing	2D or 3D draiwng in any image/picture format is OK
	Free sample	Yes
	OEM/OEM	Yes
	Application	Household, electronics, for vehicles like GM, Ford, Renault, Honda. Machinery, hospital, petrochemical, Military and Aerospace etc.
	Market	Europe, North America, Oceania
	Quality certification	ISO 90001:2008, TS16949, FDA, REACH, ROHS, SGS
	QC	Every order production will get more than 10 times regular check and 5 fives times random check by our professional QC. Or by Third party appointed by customer

Mold	Molding Process	Injection molding, mold processing, extrusion
	Mould type	processing mold, injection mold, extrusionmold
	Machines	350T vacuum pressing machine and other pressing machine at 300T,250T and so on
	Tooling equipment	Rubber tension tester, Rubber vulcanization instrument, Durometer, calipers, ageing oven
	Cavity	1~400 cavities
	Mould Life	300,000~1,00,000 times

Production	Production capacity	finish each mold of product in 3 minutes and working on 3 shifts within 24 hours
	Mold lead time	15~35 days
	Sample lead time	3~5 days
	Production time	usually 15~30 days, should be confirmed before order
	Loading port	Hangzhou, Shanghai, Ningbo or as required

###

PRODUCTS STANDARD
QUALITY CERTIFICATE	ISO 9000, TS16949, FDA, REACH, ROHS
MATERIAL STANDARD	ASTM D2000, SAE J200, JIN OR AS PER DRAWING
TOLERANCE STANDARD	RMA A1,A2,A3, DIN ISO 3302-1,DIN-7715/BS-3734 OR AS PER DRAWING
COLOR STANDARD	PANTONE COLOR, RAL COLOR
QUALITY REPORTS	PPAP, RAW MATERIAL REPORT, TEST REPORT, OFFCIAL REPORT BY THIRD PARTY

To Be Negotiated 100 Pieces
(Min. Order)

###

Usage:	Agricultural, Industrial, Medical, Vehicle, Household
Material:	Polyurethane Rubber
Request:	According to Custom′s Request
Materials:	SBR / EPDM
Colors:	Black
Hardness:	30-90 Shore a

###

Customization:	Available \| Customized Request

###

Product Description
Products	Name	polyurethane product
	Products category	rubber molded product
	Material	PUR,polyurethane
	Size	All size and thickness available.
	Shape	capable of all shapes as per drawing
	Color	Natural,black, Pantone code or RAL code, or as per client’s samples or requirements
	Hardness	20°~90° Shore A, usually 30°~80° Shore A.
	Surface finishing	Texture (VDI/MT standard, or made to client’s sample), polished (high polish, mirror polish), smooth, painting, powder coating, printing, electroplating etc.
	Drawing	2D or 3D draiwng in any image/picture format is OK
	Free sample	Yes
	OEM/OEM	Yes
	Application	Household, electronics, for vehicles like GM, Ford, Renault, Honda. Machinery, hospital, petrochemical, Military and Aerospace etc.
	Market	Europe, North America, Oceania
	Quality certification	ISO 90001:2008, TS16949, FDA, REACH, ROHS, SGS
	QC	Every order production will get more than 10 times regular check and 5 fives times random check by our professional QC. Or by Third party appointed by customer

Mold	Molding Process	Injection molding, mold processing, extrusion
	Mould type	processing mold, injection mold, extrusionmold
	Machines	350T vacuum pressing machine and other pressing machine at 300T,250T and so on
	Tooling equipment	Rubber tension tester, Rubber vulcanization instrument, Durometer, calipers, ageing oven
	Cavity	1~400 cavities
	Mould Life	300,000~1,00,000 times

Production	Production capacity	finish each mold of product in 3 minutes and working on 3 shifts within 24 hours
	Mold lead time	15~35 days
	Sample lead time	3~5 days
	Production time	usually 15~30 days, should be confirmed before order
	Loading port	Hangzhou, Shanghai, Ningbo or as required

###

PRODUCTS STANDARD
QUALITY CERTIFICATE	ISO 9000, TS16949, FDA, REACH, ROHS
MATERIAL STANDARD	ASTM D2000, SAE J200, JIN OR AS PER DRAWING
TOLERANCE STANDARD	RMA A1,A2,A3, DIN ISO 3302-1,DIN-7715/BS-3734 OR AS PER DRAWING
COLOR STANDARD	PANTONE COLOR, RAL COLOR
QUALITY REPORTS	PPAP, RAW MATERIAL REPORT, TEST REPORT, OFFCIAL REPORT BY THIRD PARTY

Types of Couplings

A coupling is a device that connects two shafts together. It transmits power from one end to another and is used for joining rotating equipment. A coupling is flexible and can accommodate a certain amount of end movement and misalignment. This allows for more flexibility in applications. Various types of couplings are available, and each one serves a specific purpose.
gearbox

Shaft couplings

There are many types of shaft couplings, and they are used in a wide range of applications. The type you need depends on the torque, speed, and horsepower you need, as well as the size of the shaft and its spatial limitations. You may also need to consider whether the coupling will accommodate misalignment.
Some shaft couplings are flexible, while others are rigid. Flexible couplings can accommodate up to two degrees of misalignment. They are available in different materials, including aluminum, stainless steel, and titanium. They can also be known by different names, depending on the industry. Some couplings can also be used in a single or multiple-shaft application.
The first type of shaft coupling is a rigid coupling, which consists of two parts that fit together tightly around the shafts. These couplings are designed to have more flexibility than sleeved models, and they can be used on fixed shafts as well. The flanged coupling, on the other hand, is designed for heavy loads and is made of two perpendicular flanges. The flanges are large enough to accommodate screws and are generally used with heavy-duty applications.
CZPT shaft couplings are a great choice if you’re looking for a shaft coupling that delivers high performance, durability, and low cost. These metal disc-style couplings provide low backlash and high torsional stiffness. Their high misalignment tolerance reduces reaction loads on connected components, which makes them ideal for high-speed precision applications. Available in single and double-disc models, they have torque ratings of up to 2,200 in-lbs. (250N) and are available in fourteen sizes.
When using shaft couplings, it is important to choose the right type for your application. Backlash can cause a shaft coupling to break or become unusable. In order to prevent this from happening, you should replace worn or loose parts, and ensure that the hub and key are evenly positioned with the shaft. If you’re using a shaft coupling in a motion-control system, it is important to keep the torque level consistent.

Flexible couplings

Flexible couplings are a type of coupling used to connect two shafts. They are made of rubber or plastic and allow for axial movement of the connected equipment. They do not require lubrication and are resistant to fatigue failure. Flexible couplings are useful for a number of applications. A common type of flexible coupling is the gear coupling, which has gear teeth inside its sleeve. Another type of flexible coupling is the metallic membrane coupling. A metallic membrane coupling is flexible due to flexing metallic discs.
One major disadvantage of flexible couplings is their inability to fit certain types of pipe. This is because most couplings need to be stretched to fit the pipe. This problem is often the result of a change in pipe technology. Traditionally, drain and soil pipe is made of ductile iron or cast iron. Today, most pipes are made of PVC, which has a larger outside diameter than either cast or ductile iron. Because of these changes in pipe technology, many coupling manufacturers have not updated their mold sizing.
Flexible couplings can be either metallic, elastomeric, or a combination of the three. While there are some common characteristics of each type, you should always consider the tradeoffs of each type before choosing one. Generally, the most important considerations when selecting a flexible coupling are torque, misalignment, and ease of assembly and maintenance.
Flexible couplings are used in a wide range of industries. They are useful for connecting two pipes to ensure torque transfer. Although the types available are different, these are the most adaptable couplings in the market. They can withstand movement, vibration, and bending without causing any damage to the piping.
gearbox

Clutch couplings

A clutch coupling connects two rotating shafts by friction. The clutch engages power when the engine is running, disengaging power when the brake is applied. Clutch couplings are used in applications where the speed of a machine is variable or where continuous service is required. The clutch can transmit power, torque, and axial force.
Clutch couplings come in a variety of styles and configurations. Some couplings are flexible, while others are rigid. Flexible couplings are available in a variety of materials, including stainless steel and aluminum. Some couplings also have a non-backlash design, which helps compensate for misalignment.
Clutch couplings may be synchronous or asynchronous. Synchronous couplings engage and disengage automatically when the driven machine exceeds its output speed. These couplings are synchronized by a synchronizing mechanism. When the output speed is exceeded, the synchronizing mechanism initiates the engagement process. The synchronizing mechanism does not engage or disengage when the output speed drops.
High speed clutches are available from a variety of manufacturers. Some manufacturers offer OEM assembly, repair services, and third-party logistics. These manufacturers serve the automotive, chemical, food, and wood industries, as well as the oilfield and material handling industries. Custom clutches can be manufactured for specific applications and can be fitted with additional features, such as precision machined teeth or keyway slots and grooves.
Couplings are available in PCE, C/T, and metric bores. Typically, the size of the input and output shafts will determine which type of coupling is needed. In addition, clutches may be configured for intermediate or high speeds, depending on the required torque.

Clamped couplings

Clamped couplings are commonly used in a variety of industries. They can be used in medical equipment, dental equipment, military equipment, laboratory equipment, and in precision industrial controls. They are available in a wide variety of sizes and keyways. This type of coupling offers a number of advantages, including ease of installation and quick and easy replacement.
A clamp coupling connects two parts by compressing them together. The clamping elements can be formed in a variety of ways, but they all have a gap between their surfaces. This friction squeezes the two parts together, much like pulling two rubber gloves apart. This type of coupling is also useful for joining two hoses or piping units.
Clamped couplings are designed with a single or double clamping shaft. The clamping parts are mounted in two halves and are held together by eight socket head cap screws. They offer high torque capacity and require little installation space. Their high rigidity ensures good positioning accuracy, making them ideal for dynamic drives. In addition, they are wear-free and offer simple radial assembly.
The invention relates to a method and system for clamping pipes to a tank vessel. This invention also relates to a method of loading and unloading tank vessels. The method can be used in oil production platforms and other platforms. A single point mooring method is also used in oil production platforms.
Clamped couplings can also be flexible. They can join two shafts together while allowing a small amount of end movement and misalignment. These couplings may also be used in the assembly of motors and gearboxes.
gearbox

CZPT’s coupling

CZPT couplings are designed to be flexible, allowing them to accommodate misaligned shafts and transmit torque in either direction. They are made with three discs, two hubs, and a center that are arranged with grooves and fins. These features allow for two degrees of freedom during assembly, and can accommodate misalignment of up to 5% of the shaft diameter.
CZPT couplings have many uses. For example, they can be used to join two parallel coaxial rotating shafts. Their ability to transmit torque at the same rotation mechanism and speed makes them ideal for applications where electrical currents may be a problem. Because the couplings are not made of metal, they are electrically isolated. Designers should test their couplings during the prototype stage to ensure they are working properly.
The CZPT coupling consists of two hubs with one slot on each. An intermediate disk is located between the two hubs. The discs are used to reduce or prevent wear on other machine parts. CZPT couplings are inexpensive and easy to replace. They also have electrical insulation, which makes them easy to repair or replace.
CZPT couplings are a popular choice for stepper motor-driven positioning stages. The plastic center disc offers electrical isolation and absorbs shocks from frequent start/stops. These couplings are available in through-hub and blind-bore styles and can be installed in many applications.
CZPT couplings also allow for small degrees of shaft misalignment. This allows them to function in systems where shaft access is limited. They are easily removed without tools.
China High Quality Customzied Rubber Coupling coupling agent ultrasound
editor by czh 2022-11-25

Nm50 shop made in China – replacement parts – in Accra Ghana – 265 Polyurethane Rubber Coupling for Pumps, Fans, Compressors, Vehicles with top quality

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 diverse branches. For a lot more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Nm50 – 265 Polyurethane Rubber Coupling for Pumps, Followers, Compressors, Vehicles

Materials:	NBR, CSM/SBR	Color:	Black
Tensile Energy:	12Mpa	Hardness:	80shore A
Elongation:	350%	Density:	one.25g/cm3
Dimension:	NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265

NM coupling
NM kind is exactly developed by a specific created synthetic rubber with 2 equivalent bodies of ca EPT iron
EPT EPT iron flanges:
Made not only for the electrical power transmission but also for safety of adaptable rubber
Versatile rubber:Purposes for pumps, followers, compressors, autos, transporting equipments, constructors, cement mixers, tractors, transmission equipment, steel operating equipment, rollers and all EPT transmissions
Created of rubber and steel cores are inserted in the teeth so as to offer outstanding longevity and efficiency of coupling

Features:
Cost-effective and practical utilizing
Tranquil and easy operation
Easy set up and routine maintenance
Accessible to equipment with large torque and intermittent procedure
Attributes of the synthetic rubber: suitable elasticity and resistance to damping, oil, acids and alkalie

Requirements:
one: with CE certificate
two: full detection of quality just before delivery
3: EPT is welcomed
four: rich encounter in precision casting
content: CSM/SBR, NBR
coloration: black.
surface area: clean
tensile toughness: 12Mpa
hardness: 80Shore A
elongation: 400%
density: 1.25g/cm3
elasticity affect: >25%
tear energy: 35KN/m
working temperature: 100oC
regular dimension:
NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265

Actual physical character: produced by injection with high top quality polyester or mould CSM/SBR. It is creating and unique for all varieties of steel shaft coupling with extremely good efficiency of large tensile power, substantial put on resistant, high elastic resilience, drinking water resistant, oil resistant and superb exhaustion resilience, large impact resistant and so forth. We have entire sets moulds and provide full assortment of GR, GS, MT, Hb, HRC, L, NM and Gear J sequence couplings with higher good quality and superb encounter. Utilize to all kinds of industrial metallic shaft coupling.

Specifications:
materials: polyester, CSM/SBR
coloration: yellow, crimson, purple, inexperienced, black etc.
area: clean
tensile energy: twelve-55Mpa
hardness: eighty-98Shore A
elongation: 400%-650%
density: 1.25g/cm3
elasticity influence: >25%
tear strength: 35-155KN/m
akron abrasion reduction: <0.05cm3/1.61km
compression established (22h*70oC): <10%
doing work temperature: 120oC
standard measurement for polyurethane coupling:
GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180
MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13
HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280
L35, L50, L70, L75, L90/95, L99/100, L110, L150, L190, L225, L276
FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R
common size for rubber coupling:
Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315
HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280
L35, L50, L70, L75, L90/ninety five, L99/a hundred, L110, L150, L190, L225
NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265
Equipment 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J
particular dimension build molding in accordance to the buyer’s drawings
***when you enquiry, p EPT confirm product’s quantity and quantity***

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 distinct branches. For far more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic equipment manufacturer’s (OEM) element quantities or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our firm and the outlined substitute components contained herein are not sponsored, accredited, or manufactured by the OEM.

Nm50 shop made in China - replacement parts - in Accra Ghana - 265 Polyurethane Rubber Coupling for Pumps, Fans, Compressors, Vehicles with top quality

Best sales China in Buffalo City South Africa Quality FCL 160 Coupling with Flexible Rubber for Driving Machine with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Product Description

      FCL Coupling/Shaft Coupling /Pin & Bush Coupling /FCL Flexible Coupling/NBK FCL Coupling is widely used for its compacts designing, easy installation, convenient maintenance, small and light weight.
     As long as the relative displacement between shafts is kept within the specified tolerance, couplings will operate the be EPT function and have a longer working life.
     Thus it is greatly demanded in medium and minor power transmission systems driven by motors, such as speed reducers, hoists, compressors, conveyors, spinning and weaving machines and ball mills.

Technical Date

EPT No.	A	d	L	C1	C2	B	F1	F2	n	a	M	t	PartsNo.	Max. Torque	Max.R.P.M	Eccentricity	Angularity	End-Play
FCL 100	100	11~25	35.5	42.5	42.5	67	16	16	4	10	23	3	#2	29N.m	4000	0.1	1/6°	±2.1
FCL 112	112	13~28	40	50	50	75	16	16	4	10	23	3	#2	33N.m	4000	0.1	1/6°	±2.1
FCL 125	125	13~32	45	56	50	85	18	18	4	14	32	3	#3	73N.m	4000	0.1	1/6°	±2.1
FCL 140	140	13~38	50	71	63	100	18	18	6	14	32	3	#3	130N.m	4000	0.2	1/6°	±2.1
FCL 160	160	15~45	56	80	80	115	18	18	8	14	32	3	#3	200N.m	4000	0.2	1/6°	±2.1
FCL 180	180	15~50	63	90	90	132	18	18	8	14	32	3	#3	230N.m	3500	0.2	1/6°	±2.1
FCL 200	200	21~56	71	100	100	145	22.4	22.4	8	20	41	4	#4	440N.m	3200	0.2	1/6°	±2.8
FCL 224	224	21~63	80	112	112	170	22.4	22.4	8	20	41	4	#4	510N.m	2850	0.2	1/6°	±2.8
FCL 250	250	25~71	90	125	125	180	28	28	8	25	51	4	#5	850N.m	2550	0.2	1/6°	±2.8
FCL 280	280	34~80	100	140	140	200	28	40	8	28	57	4	#6	1500N.m	2300	0.3	1/6°	±2.8
FCL 315	315	41~90	112	160	160	236	28	40	10	28	57	4	#6	2200N.m	2050	0.3	1/6°	±2.8
FCL 355	355	60~100	125	180	180	260	35.5	56	8	35.5	72	5	#8	3500N.m	1800	0.3	1/6°	±3.5
FCL 400	400	60~110	125	200	200	300	35.5	56	10	35.5	72	5	#8	5000N.m	1600	0.3	1/6°	±3.5
FCL 450	450	65~125	140	224	224	355	35.5	56	12	35.5	72	5	#8	7100N.m	1400	0.3	1/6°	±3.5
FCL 560	560	85~140	160	250	250	450	35.5	56	14	35.5	72	5	#8	10000N.m	1150	0.3	1/6°	±3.5
FCL 630	630	95~160	180	280	280	530	35.5	56	18	35.5	72	5	#8	16000N.m	1000	0.3	1/6°	±3.5

Related Products & Exhibitioin

Roller Chain coupling NM Coupling Curved Jaw Coupling

Manufacturing

About Us

Kasin group was established in 1989, and its fir EPT product is casting carrier trolley for power & free conveyor system. In 1995, EPT purchased HangZhou Guoping Forging Factory (LYGP), a marketer of forging bolts & nuts to power & free line market in china. With this acquisition, EPT positioned itself as one of major parts suppliers of monorail and power & free conveyor system in china.

In 2005, H&H Corp., a professional manufacturer of large size conveyor chain, was purchased a portion as sharehould by Kasin, and worked as export window to all over the world, especially bucket elevator chain, sugar mill chain, welded mill scaper chain.

In 2015, EPT established itself machinery company/ EPT machinery(ZheJiang )Co.,Ltd., produced fleixible coupling, eg: FCL Coupling, NM Coupling, Curved Jaw Coupling, Chain Coupling andJaw Coupling.

Nowadays, EPT is one of the bigge EPT professional speciali EPT of EPT Class EPT Chain, Drop Forged Rivetless Chain, Forged Chain, Sugar Mill Chain, Bucket EPT Chain, Flexible Couplings and 100% to oversea market, covering Japan, U.S. and Europ etc.

With the certificate of ISO 9001 and GB/T 19001, EPT provide top quality products at the reasonable price, to win-win situation in long-terms cooperation, adhering to the slogan: “FIR EPT TIME, EVERY TIME“.

Our mission is to provide highest quality products at the be EPT possible price. And in doing so, to provide an unmatched customer experience and to build customer tru EPT and satisfaction. Honest, Quality, Efficient, Developing, Security the five crucial components constituting KASIN, which is the key motto for all of the EPT employees. Therefore, we keep striving to build a corporate system that is highly appreciated and we hope that you continue to select and use EPT products with pride and satisfaction.

Certificates

Packing & Delivery

EPT Packing; Carton & Wooden Case

FAQ

Q: Are you trading company or manufacturer ?

A: We are professionally manufacturer in china and own ourself casting-workshop, warmly welcome to visit our factory at any time.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-25 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, it’s available for EPT to submit sample for approval free of charge, however it’s EPT regulation: for new potentioal customer, sample is free but customer is responsilble for logistic fee.

Q: What is your terms of payment ?

A: 100%T/T Before shipment after inspect well

If you have an EPT question, p EPT feel free to contact us as below:

EPT Industries(ZheJiang ) Co.,Ltd.

No.989,Guoshun Road, ZheJiang FengPu Industrial Park,
FengXian District, ZheJiang , P.R.China, 201400

Tel: 86~571-8822571/8822 0571 -57152031 Fax: 0086-571-88220971: 86~571-8822571/8822 0571 -57152030

Http://

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Best sales China in Buffalo City South Africa Quality FCL 160 Coupling with Flexible Rubber for Driving Machine with top quality