Three steps to install the elastic pin gear coupling:

　　The specific steps of installing and removing the elastic pin gear coupling are very important. If the steps are wrong, it may cause losses to our work.When installing, first adjust the axial, radial and angular deviation of the coupling, and determine the allowable deviation range according to the shaft diameter.

　　installation steps:

　　1. Put the outer ring on the half coupling, install the baffle, install the half coupling on a shaft, and install the pin.

　　2. Install the other half of the coupling in the outer ring and install the pin.

　　3. Install the baffle, fix it with screws, and install another shaft.

　　Disassembly steps:

　　1. Loosen the screws on the baffle, remove the baffle, and take out the pin.

　　2. Loosen the base screw of the drive end and remove the drive.

　　3. Loosen the top wire on the coupling and pull out the coupling with a triangle puller.