Hot Products
Contact Ever-Power Drive
Botou Ever-Power Transmission Machinery Co., Ltd. " technical knowledge
- Disassembly and transfer method of pin coupling[2016-09-24]
- When disassembling the pin coupling, mark the position between the pulley or pin coupling and the rotating shaft first, and tighten the factory fixing screws and pins
- How to classify pin couplings[2016-09-13]
- The pin coupling is a pin made of a number of non-metallic elastic materials and placed in the flange holes of the two halves of the coupling.
- Hardness of coupling pin and tolerance of coupling shaft hole[2016-09-12]
- The elastic pin is used on the TL-type LXZ-type pin coupling, which is mainly used to drive the two half couplings to fix and transmit.
- Structural features of pin coupling[2016-09-11]
- The pin coupling relies on the locking force of the pin group to generate the friction torque on the contact surface, and compress the rubber elastic sleeve to transmit the torque
- Popularization of knowledge of commonly used couplings[2016-09-09]
- Rigid coupling does not have the ability to compensate for the relative offset of the two shafts being coupled, nor does it have cushioning and shock absorption performance
- The working principle and application effect of the coupling [2016-08-20]
- The rotation of the prime mover drives the swing arm to rotate, and it is thrown out under the action of centrifugal force, as the motor speed increases
- The superiority of drum gear coupling[2016-08-19]
- After carburizing and quenching treatment on the meshing tooth surface of drum teeth, the bearing capacity is high; the main failure mode of drum teeth is wear
- Common coupling balance, etc.[2016-08-17]
- For various reasons, the center of mass or inertial principal axis of the coupling does not coincide with the axis of rotation
- How to make the service life of the coupling longer[2016-08-13]
- An important way for the service life of the coupling, the tooth width coefficient affects the tooth root bending strength and tooth surface contact strength of the gear tooth
- Drum gear coupling should be heat treated [2016-08-12]
- Drum-shaped gear couplings are all heat treated. Only in this way can they give play to their superiority, with better toughness and stronger wear resistance